Español (España)ACT 4-Port DisplayPort 4K@60Hz KVM switch
Item No.AC7934
4K@60Hz | MST/SST | cables included | metal housing | locked power connection | mounting brackets
- 4-Port 4K@60Hz DisplayPort KVM Switch: control four computers with a single monitor, USB keyboard and mouse
- Supports a resolution up to 3840x2160 (4K) @60Hz, 4:4:4 12-bit, DisplayPort 1.4a, HDCP 2.2 compliant
- 4 USB-A ports 5Gbps for peripheral sharing
- Control the KVM switch with the front panel select button, IR remote control, keyboard hotkeys, mouse or RS-232 commands
- Supports Multi-Stream Transport (MST) daisy chaining on DisplayPort with a bandwidth of 32.4Gbps
- Dual-Mode DisplayPort technology (DP++) supports passive HDMI and DVI adapters
- Supplied with DisplayPort cables, USB-B cables, remote control, IR receiver, RS-232 connector and mounting brackets
- Power supply included (12V / 1A / 12W); secure locked power connection
The AC7934 4-port DisplayPort KVM switch controls four computers while using a single DisplayPort monitor, single USB keyboard and mouse. The DisplayPort output supports a monitor with a resolution up to 4K@60Hz. The AC7934 lets you switch between computers using the buttons on the switch itself, the IR remote control, keyboard hotkeys, a mouse, or RS-232 commands. The AC7934 has a solid metal housing and comes with all needed cabling.
Control four computers with a single DisplayPort monitor, keyboard and mouse
Simplify your workspace by connecting four computers to the AC7934 via DisplayPort. Connect a single DisplayPort monitor and a keyboard and mouse set to the switch and control all host devices with minimal setup.
Supports up to 4K @ 60Hz
The AC7934 DisplayPort KVM switch supports 4K resolution at 60Hz with 4:4:4 12 bit color. The KVM switch complies with DisplayPort 1.4a and HDCP 2.2 standards.
Easy switching between computers
Switching between four connected computers is easy with the dedicated button on the AC7934 KVM switch. Or use IR control, a mouse, keyboard shortcuts or RS-232 commands.
Supports MST daisy chaining
The AC7934 supports both SST (Single Stream Transport) and MST (Multi Stream Transport) via daisy chaining. Connect additional monitors via DisplayPort MST daisy chaining to extend your desktop across multiple screens (depending on total bandwidth and source capabilities).
Dual-Mode DisplayPort DP++ support
Dual-Mode DisplayPort (DP++) ensures compatibility with passive HDMI and DVI adapters.
Additional features
The AC7934 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch includes 4x DisplayPort cables, 4x USB-B cables, remote control, IR receiver, RS-232 connector and mounting brackets with screws.
Prevent accidental power cord disconnection
The power connection on the KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home office: switch easily between workstations with only one monitor, mouse, keyboard setup.
Corporate: IT professionals can manage multiple work PCs, servers or virtual machines.
Control rooms, labs and technical facilities: Ideal for critical environments where operators need access to multiple PCs.
Control four computers with a single DisplayPort monitor, keyboard and mouse
Simplify your workspace by connecting four computers to the AC7934 via DisplayPort. Connect a single DisplayPort monitor and a keyboard and mouse set to the switch and control all host devices with minimal setup.
Supports up to 4K @ 60Hz
The AC7934 DisplayPort KVM switch supports 4K resolution at 60Hz with 4:4:4 12 bit color. The KVM switch complies with DisplayPort 1.4a and HDCP 2.2 standards.
Easy switching between computers
Switching between four connected computers is easy with the dedicated button on the AC7934 KVM switch. Or use IR control, a mouse, keyboard shortcuts or RS-232 commands.
Supports MST daisy chaining
The AC7934 supports both SST (Single Stream Transport) and MST (Multi Stream Transport) via daisy chaining. Connect additional monitors via DisplayPort MST daisy chaining to extend your desktop across multiple screens (depending on total bandwidth and source capabilities).
Dual-Mode DisplayPort DP++ support
Dual-Mode DisplayPort (DP++) ensures compatibility with passive HDMI and DVI adapters.
Additional features
The AC7934 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch includes 4x DisplayPort cables, 4x USB-B cables, remote control, IR receiver, RS-232 connector and mounting brackets with screws.
Prevent accidental power cord disconnection
The power connection on the KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home office: switch easily between workstations with only one monitor, mouse, keyboard setup.
Corporate: IT professionals can manage multiple work PCs, servers or virtual machines.
Control rooms, labs and technical facilities: Ideal for critical environments where operators need access to multiple PCs.
In stock
Description
4K@60Hz | MST/SST | cables included | metal housing | locked power connection | mounting brackets
- 4-Port 4K@60Hz DisplayPort KVM Switch: control four computers with a single monitor, USB keyboard and mouse
- Supports a resolution up to 3840x2160 (4K) @60Hz, 4:4:4 12-bit, DisplayPort 1.4a, HDCP 2.2 compliant
- 4 USB-A ports 5Gbps for peripheral sharing
- Control the KVM switch with the front panel select button, IR remote control, keyboard hotkeys, mouse or RS-232 commands
- Supports Multi-Stream Transport (MST) daisy chaining on DisplayPort with a bandwidth of 32.4Gbps
- Dual-Mode DisplayPort technology (DP++) supports passive HDMI and DVI adapters
- Supplied with DisplayPort cables, USB-B cables, remote control, IR receiver, RS-232 connector and mounting brackets
- Power supply included (12V / 1A / 12W); secure locked power connection
The AC7934 4-port DisplayPort KVM switch controls four computers while using a single DisplayPort monitor, single USB keyboard and mouse. The DisplayPort output supports a monitor with a resolution up to 4K@60Hz. The AC7934 lets you switch between computers using the buttons on the switch itself, the IR remote control, keyboard hotkeys, a mouse, or RS-232 commands. The AC7934 has a solid metal housing and comes with all needed cabling.
Control four computers with a single DisplayPort monitor, keyboard and mouse
Simplify your workspace by connecting four computers to the AC7934 via DisplayPort. Connect a single DisplayPort monitor and a keyboard and mouse set to the switch and control all host devices with minimal setup.
Supports up to 4K @ 60Hz
The AC7934 DisplayPort KVM switch supports 4K resolution at 60Hz with 4:4:4 12 bit color. The KVM switch complies with DisplayPort 1.4a and HDCP 2.2 standards.
Easy switching between computers
Switching between four connected computers is easy with the dedicated button on the AC7934 KVM switch. Or use IR control, a mouse, keyboard shortcuts or RS-232 commands.
Supports MST daisy chaining
The AC7934 supports both SST (Single Stream Transport) and MST (Multi Stream Transport) via daisy chaining. Connect additional monitors via DisplayPort MST daisy chaining to extend your desktop across multiple screens (depending on total bandwidth and source capabilities).
Dual-Mode DisplayPort DP++ support
Dual-Mode DisplayPort (DP++) ensures compatibility with passive HDMI and DVI adapters.
Additional features
The AC7934 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch includes 4x DisplayPort cables, 4x USB-B cables, remote control, IR receiver, RS-232 connector and mounting brackets with screws.
Prevent accidental power cord disconnection
The power connection on the KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home office: switch easily between workstations with only one monitor, mouse, keyboard setup.
Corporate: IT professionals can manage multiple work PCs, servers or virtual machines.
Control rooms, labs and technical facilities: Ideal for critical environments where operators need access to multiple PCs.
Control four computers with a single DisplayPort monitor, keyboard and mouse
Simplify your workspace by connecting four computers to the AC7934 via DisplayPort. Connect a single DisplayPort monitor and a keyboard and mouse set to the switch and control all host devices with minimal setup.
Supports up to 4K @ 60Hz
The AC7934 DisplayPort KVM switch supports 4K resolution at 60Hz with 4:4:4 12 bit color. The KVM switch complies with DisplayPort 1.4a and HDCP 2.2 standards.
Easy switching between computers
Switching between four connected computers is easy with the dedicated button on the AC7934 KVM switch. Or use IR control, a mouse, keyboard shortcuts or RS-232 commands.
Supports MST daisy chaining
The AC7934 supports both SST (Single Stream Transport) and MST (Multi Stream Transport) via daisy chaining. Connect additional monitors via DisplayPort MST daisy chaining to extend your desktop across multiple screens (depending on total bandwidth and source capabilities).
Dual-Mode DisplayPort DP++ support
Dual-Mode DisplayPort (DP++) ensures compatibility with passive HDMI and DVI adapters.
Additional features
The AC7934 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch includes 4x DisplayPort cables, 4x USB-B cables, remote control, IR receiver, RS-232 connector and mounting brackets with screws.
Prevent accidental power cord disconnection
The power connection on the KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home office: switch easily between workstations with only one monitor, mouse, keyboard setup.
Corporate: IT professionals can manage multiple work PCs, servers or virtual machines.
Control rooms, labs and technical facilities: Ideal for critical environments where operators need access to multiple PCs.
Specifications
- Brand
- ACT
- Product category
- Switches / KVM
- Bandwidth
- 32.4 Gbps
- Number of screens
- 1
- Connections
- 3.5 mm jack, DisplayPort, Terminal block, USB
- Connections (computer)
- DisplayPort female (x4), USB B female (x4)
- Connections (console)
- DisplayPort female (x1), Terminal block 3-pin female (x1), USB 3 A female (x4)
- Detachable computer cable(s)
- Yes
- Number of consoles
- 1
- Number of computers
- 4
- MST support
- Yes
- 4K compatible
- Yes
- Max. resolution @ 60Hz
- 3840 x 2160
- Other resolutions
- 3840×2160@120Hz (4:4:4 8bit, 4:2:0 8/10/12bit ), 4096×2160@120Hz (4:4:4 8bit, 4:2:0 8/10/12bit )
- Video signal
- DisplayPort
- Supported features
- DSC
- HDCP version
- HDCP 2.2
- DisplayPort specification
- DisplayPort 1.4
- Other signals
- IR, RS-232, USB 3.2 Gen 1 - SuperSpeed (USB 3.0)
- Control method
- Button, Hot-key, Mouse, Serial
- Power supply
- External power supply
- Power supply specification
- 12V / 1A / 12W
- Included
- 4-Port 4K@60Hz DisplayPort KVM Switch (1x), IR Remote (CR2025 battery included), 38KHz IR Receiver Cable 1.5mtr (1x), 3pin-3.81mm Phoenix Connector male (1x), USB-A male to USB-B 3.0 male 1.8m (4x), DP male to male cable 1.5m (4x), Mounting brackets (2x), Machine Screws M3x4 (4x), Locking power supply 12V/1A (1x), Quick install (1x)
- Audio formats
- LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DTS:X, DSD
- Switching functionality
- Multiple to one
- Brand item no.
- AC7934
- EAN code
- 8716065589825
ACT 4-Port DisplayPort 4K@60Hz KVM switch
Item No.AC7934
4K@60Hz | MST/SST | cables included | metal housing | locked power connection | mounting brackets
- 4-Port 4K@60Hz DisplayPort KVM Switch: control four computers with a single monitor, USB keyboard and mouse
- Supports a resolution up to 3840x2160 (4K) @60Hz, 4:4:4 12-bit, DisplayPort 1.4a, HDCP 2.2 compliant
- 4 USB-A ports 5Gbps for peripheral sharing
- Control the KVM switch with the front panel select button, IR remote control, keyboard hotkeys, mouse or RS-232 commands
- Supports Multi-Stream Transport (MST) daisy chaining on DisplayPort with a bandwidth of 32.4Gbps
- Dual-Mode DisplayPort technology (DP++) supports passive HDMI and DVI adapters
- Supplied with DisplayPort cables, USB-B cables, remote control, IR receiver, RS-232 connector and mounting brackets
- Power supply included (12V / 1A / 12W); secure locked power connection
The AC7934 4-port DisplayPort KVM switch controls four computers while using a single DisplayPort monitor, single USB keyboard and mouse. The DisplayPort output supports a monitor with a resolution up to 4K@60Hz. The AC7934 lets you switch between computers using the buttons on the switch itself, the IR remote control, keyboard hotkeys, a mouse, or RS-232 commands. The AC7934 has a solid metal housing and comes with all needed cabling.
Control four computers with a single DisplayPort monitor, keyboard and mouse
Simplify your workspace by connecting four computers to the AC7934 via DisplayPort. Connect a single DisplayPort monitor and a keyboard and mouse set to the switch and control all host devices with minimal setup.
Supports up to 4K @ 60Hz
The AC7934 DisplayPort KVM switch supports 4K resolution at 60Hz with 4:4:4 12 bit color. The KVM switch complies with DisplayPort 1.4a and HDCP 2.2 standards.
Easy switching between computers
Switching between four connected computers is easy with the dedicated button on the AC7934 KVM switch. Or use IR control, a mouse, keyboard shortcuts or RS-232 commands.
Supports MST daisy chaining
The AC7934 supports both SST (Single Stream Transport) and MST (Multi Stream Transport) via daisy chaining. Connect additional monitors via DisplayPort MST daisy chaining to extend your desktop across multiple screens (depending on total bandwidth and source capabilities).
Dual-Mode DisplayPort DP++ support
Dual-Mode DisplayPort (DP++) ensures compatibility with passive HDMI and DVI adapters.
Additional features
The AC7934 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch includes 4x DisplayPort cables, 4x USB-B cables, remote control, IR receiver, RS-232 connector and mounting brackets with screws.
Prevent accidental power cord disconnection
The power connection on the KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home office: switch easily between workstations with only one monitor, mouse, keyboard setup.
Corporate: IT professionals can manage multiple work PCs, servers or virtual machines.
Control rooms, labs and technical facilities: Ideal for critical environments where operators need access to multiple PCs.
Control four computers with a single DisplayPort monitor, keyboard and mouse
Simplify your workspace by connecting four computers to the AC7934 via DisplayPort. Connect a single DisplayPort monitor and a keyboard and mouse set to the switch and control all host devices with minimal setup.
Supports up to 4K @ 60Hz
The AC7934 DisplayPort KVM switch supports 4K resolution at 60Hz with 4:4:4 12 bit color. The KVM switch complies with DisplayPort 1.4a and HDCP 2.2 standards.
Easy switching between computers
Switching between four connected computers is easy with the dedicated button on the AC7934 KVM switch. Or use IR control, a mouse, keyboard shortcuts or RS-232 commands.
Supports MST daisy chaining
The AC7934 supports both SST (Single Stream Transport) and MST (Multi Stream Transport) via daisy chaining. Connect additional monitors via DisplayPort MST daisy chaining to extend your desktop across multiple screens (depending on total bandwidth and source capabilities).
Dual-Mode DisplayPort DP++ support
Dual-Mode DisplayPort (DP++) ensures compatibility with passive HDMI and DVI adapters.
Additional features
The AC7934 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch includes 4x DisplayPort cables, 4x USB-B cables, remote control, IR receiver, RS-232 connector and mounting brackets with screws.
Prevent accidental power cord disconnection
The power connection on the KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home office: switch easily between workstations with only one monitor, mouse, keyboard setup.
Corporate: IT professionals can manage multiple work PCs, servers or virtual machines.
Control rooms, labs and technical facilities: Ideal for critical environments where operators need access to multiple PCs.
In stock
Description
4K@60Hz | MST/SST | cables included | metal housing | locked power connection | mounting brackets
- 4-Port 4K@60Hz DisplayPort KVM Switch: control four computers with a single monitor, USB keyboard and mouse
- Supports a resolution up to 3840x2160 (4K) @60Hz, 4:4:4 12-bit, DisplayPort 1.4a, HDCP 2.2 compliant
- 4 USB-A ports 5Gbps for peripheral sharing
- Control the KVM switch with the front panel select button, IR remote control, keyboard hotkeys, mouse or RS-232 commands
- Supports Multi-Stream Transport (MST) daisy chaining on DisplayPort with a bandwidth of 32.4Gbps
- Dual-Mode DisplayPort technology (DP++) supports passive HDMI and DVI adapters
- Supplied with DisplayPort cables, USB-B cables, remote control, IR receiver, RS-232 connector and mounting brackets
- Power supply included (12V / 1A / 12W); secure locked power connection
The AC7934 4-port DisplayPort KVM switch controls four computers while using a single DisplayPort monitor, single USB keyboard and mouse. The DisplayPort output supports a monitor with a resolution up to 4K@60Hz. The AC7934 lets you switch between computers using the buttons on the switch itself, the IR remote control, keyboard hotkeys, a mouse, or RS-232 commands. The AC7934 has a solid metal housing and comes with all needed cabling.
Control four computers with a single DisplayPort monitor, keyboard and mouse
Simplify your workspace by connecting four computers to the AC7934 via DisplayPort. Connect a single DisplayPort monitor and a keyboard and mouse set to the switch and control all host devices with minimal setup.
Supports up to 4K @ 60Hz
The AC7934 DisplayPort KVM switch supports 4K resolution at 60Hz with 4:4:4 12 bit color. The KVM switch complies with DisplayPort 1.4a and HDCP 2.2 standards.
Easy switching between computers
Switching between four connected computers is easy with the dedicated button on the AC7934 KVM switch. Or use IR control, a mouse, keyboard shortcuts or RS-232 commands.
Supports MST daisy chaining
The AC7934 supports both SST (Single Stream Transport) and MST (Multi Stream Transport) via daisy chaining. Connect additional monitors via DisplayPort MST daisy chaining to extend your desktop across multiple screens (depending on total bandwidth and source capabilities).
Dual-Mode DisplayPort DP++ support
Dual-Mode DisplayPort (DP++) ensures compatibility with passive HDMI and DVI adapters.
Additional features
The AC7934 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch includes 4x DisplayPort cables, 4x USB-B cables, remote control, IR receiver, RS-232 connector and mounting brackets with screws.
Prevent accidental power cord disconnection
The power connection on the KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home office: switch easily between workstations with only one monitor, mouse, keyboard setup.
Corporate: IT professionals can manage multiple work PCs, servers or virtual machines.
Control rooms, labs and technical facilities: Ideal for critical environments where operators need access to multiple PCs.
Control four computers with a single DisplayPort monitor, keyboard and mouse
Simplify your workspace by connecting four computers to the AC7934 via DisplayPort. Connect a single DisplayPort monitor and a keyboard and mouse set to the switch and control all host devices with minimal setup.
Supports up to 4K @ 60Hz
The AC7934 DisplayPort KVM switch supports 4K resolution at 60Hz with 4:4:4 12 bit color. The KVM switch complies with DisplayPort 1.4a and HDCP 2.2 standards.
Easy switching between computers
Switching between four connected computers is easy with the dedicated button on the AC7934 KVM switch. Or use IR control, a mouse, keyboard shortcuts or RS-232 commands.
Supports MST daisy chaining
The AC7934 supports both SST (Single Stream Transport) and MST (Multi Stream Transport) via daisy chaining. Connect additional monitors via DisplayPort MST daisy chaining to extend your desktop across multiple screens (depending on total bandwidth and source capabilities).
Dual-Mode DisplayPort DP++ support
Dual-Mode DisplayPort (DP++) ensures compatibility with passive HDMI and DVI adapters.
Additional features
The AC7934 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch includes 4x DisplayPort cables, 4x USB-B cables, remote control, IR receiver, RS-232 connector and mounting brackets with screws.
Prevent accidental power cord disconnection
The power connection on the KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home office: switch easily between workstations with only one monitor, mouse, keyboard setup.
Corporate: IT professionals can manage multiple work PCs, servers or virtual machines.
Control rooms, labs and technical facilities: Ideal for critical environments where operators need access to multiple PCs.
Specifications
- Brand
- ACT
- Product category
- Switches / KVM
- Bandwidth
- 32.4 Gbps
- Number of screens
- 1
- Connections
- 3.5 mm jack, DisplayPort, Terminal block, USB
- Connections (computer)
- DisplayPort female (x4), USB B female (x4)
- Connections (console)
- DisplayPort female (x1), Terminal block 3-pin female (x1), USB 3 A female (x4)
- Detachable computer cable(s)
- Yes
- Number of consoles
- 1
- Number of computers
- 4
- MST support
- Yes
- 4K compatible
- Yes
- Max. resolution @ 60Hz
- 3840 x 2160
- Other resolutions
- 3840×2160@120Hz (4:4:4 8bit, 4:2:0 8/10/12bit ), 4096×2160@120Hz (4:4:4 8bit, 4:2:0 8/10/12bit )
- Video signal
- DisplayPort
- Supported features
- DSC
- HDCP version
- HDCP 2.2
- DisplayPort specification
- DisplayPort 1.4
- Other signals
- IR, RS-232, USB 3.2 Gen 1 - SuperSpeed (USB 3.0)
- Control method
- Button, Hot-key, Mouse, Serial
- Power supply
- External power supply
- Power supply specification
- 12V / 1A / 12W
- Included
- 4-Port 4K@60Hz DisplayPort KVM Switch (1x), IR Remote (CR2025 battery included), 38KHz IR Receiver Cable 1.5mtr (1x), 3pin-3.81mm Phoenix Connector male (1x), USB-A male to USB-B 3.0 male 1.8m (4x), DP male to male cable 1.5m (4x), Mounting brackets (2x), Machine Screws M3x4 (4x), Locking power supply 12V/1A (1x), Quick install (1x)
- Audio formats
- LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DTS:X, DSD
- Switching functionality
- Multiple to one
- Brand item no.
- AC7934
- EAN code
- 8716065589825